The LED Fiberscope is a lightweight ILLUMINATED visual
inspection and under door scope, used to
find contraband, detect explosive devices, and view
the contents of a room.
With the LED Fiberscope, you can see danger before facing it. You
should know if a man with a gun is on the other side of the door you are walking
through or if a suit case, backpack, or abandoned luggage has an explosive
device in it, waiting to detonate.
The LED Fiber scope system is designed as
an optical surveillance inspection system used for Emergency
Responders, EOD Bomb Detection, and Bomb Disposal applications. All controls are
built into a uniquely designed handle, making it really easy to hold and use.
PRIMARY SPECIFICATION:
LED
Fiberscope Model 6 mm Diameter x 40" length fiber
scope
Digital Evidence Collector
The LED Fiberscope can take digital photographs to document
inspections and findings. A Universal “B” style eyepiece can accommodate almost
all video and camera equipment when used with a C-mount or coupler attachment.
To purchase the LED Fiberscope with Pentax Digital Camera and Coupler Kit, click
here.
This Digital Evidence Collector will enable you to take digital
photos as well as digital video that you can save onto memory cards, load on to
your computer, and send to others via email.
Other Features:
Power Indicators: 3 light
indicators for remaining operation time
Green = full power
Yellow = approximately 10
minutes left in battery
Red = change and recharge
battery
Light Output Controls:
Push buttons are used to increase or decrease light
output
Articulation Controls:
Thumb operated articulation enables the user to
move the end of the scope in order to change the viewing
angle
Electrostatic Grounding:
If you are operating in a highly static environment, the
LED Fiberscope has a Common Point Ground for grounding wire, when
needed.
Stress relief is attached where the scope handle and shaft are
joined. This is removable to accommodate a semi-flexible guide tube when a more rigid
shaft is needed.
The
LED illumination platform includes high intensity 3 Watt White LED light and is
built directly in the handle of the scope - offering the maximum light delivery.
There are no separate light sources or light guide cables, and no need for
replacement bulbs. The LED has a life of approximately 50,000
hours.
The outside shaft of the scope is made of rugged Tungsten braiding
and is fully immersible in gasoline, diesel fuel, water, and other liquids. The
scope has two-way articulation, 120° up / down directions. The Field of View is
60° for the 6.0mm diameter model, and includes a 25X magnification feature. The
Field of View is 45° for the 4.0mm diameter model, and includes a 30X
magnification feature.
On the 6.0mm diameter shaft, the tip can be removed to
accommodate a 90° angle tip (optional).
The LED Fiberscope is powered primarily by a fully rechargeable
Lithium Ion Battery, which is inserted in the battery compartment in the scope
handle. A fully charged battery provides approximately 90 minutes of continuous
operation.
Directly below the battery compartment is a port to power the unit
via AC or DC power cord. Both power cords are optional.
A non-destructive testing (NDT) or maintenance, repair, or overhaul
(MRO) professional is thus enabled to use the scope with battery power at a
worksite, or with AC power at a workbench. Police and law enforcement
professionals can use the scope with battery power, or with a DC power cord that
plugs into a vehicle cigarette lighter.
A battery charger is included in the scope kit. The charger can be
powered via AC or DC power cords.
Please note: The cords that are included with the battery charger are
for the battery charger only. They are not used to power the LED
Fiberscope.
Q: How is the LED Fiberscope different from others?
A: Current fiberscope designs require separate light sources and cables
that inhibit mobility and efficiency. The LED Fiberscope is a 1.5 lbs all-in-one
contraband detector that moves without restraint, giving the user a visual
inspection scope that is not weighed down by a tethered light source, shoulder
strap, or cumbersome external light box.
FiberScopes come with several included accessories. These accessories are generally in stock and before a FiberScope is shipped, several factors go into kitting and organizing each order so errors may be avoided.
Therefore, it may take a day or two before a FiberScope kit is shipped out.
If you are with a Law Enforcement Agency and require next day service, you may contact us before placing your order for expediting your request.